Free Crosswords Online!
Designing a crossword grid is by no means easy, and this piece discusses the basics of good grid construction.

Just before writing this I had to reject two crosswords which I had been sent for publication. In both cases the clues were generally very good, but the grids the setters had used were not acceptable. It is always a shame when this happens, and to the uninitiated it may seem like sending back a perfectly decent meal because you donít like the colour of the plate. Isnít the grid just somewhere to put the answers to the clues?

To some extent thatís true, and Iíll confess that I think people on crossword forums who get worked up about very minor aspects of grid construction would benefit from getting out a bit more. However there are certain limits to what is acceptable, and a poorly designed grid can make a puzzle unnecessarily difficult, if not impossible, to solve. Almost all of the problems one encounters with grids concern what is called checking. A checked letter is one which appears at the intersection of an across and a down answer. Since this letter is shared by two answers, you have a way of checking that youíve entered the correct letter in the grid. An unchecked letter is one that does not intersect with another answer. In the NW corner of the example grid on the left, the checked letters are in blue and the unchecked letters in red.

The term ďunchecked letterĒ is often abbreviated to ďunchĒ. Itís an ugly word (it sounds like a pit bull taking a large bite out of the postmanís leg) and Iím all for keeping jargon to a minimum in these days of ďblue sky thinkingĒ and other such nonsense, but the abbreviation is rather convenient so I shall be using it here.

It should be obvious that the more unches there are in an answer, the less help you get from crossing answers, which rather defeats the point of a crossword (the clueís in the name). The generally accepted standard is that the number of unches should be no more than half the total word length. I have illustrated this in the table below.

Total Letters Max. Unches
3 1
4 2
5 2 (3)
6 3
7 3 (4)
8 4
9 4 (5)
10 5

For words with an odd number of letters, the ideal is that checked letters should outnumber the unches by one. The numbers in brackets indicate the number of unches you will find quite often in practice in grids from respectable sources.

The longer the word, the less it matters whether the number of unches is one more or one less than half the total number of letters, but for five-letter words, having only the second and fourth letters checked Ė as in 14 and 17 across in my example grid Ė can be a genuine cause of frustration for solvers. Itís not so bad if the checking letters give you _K_R_ because there arenít many possibilities for that letter combination. More often than not, though, the checked letters will be something like _A_E_ and unless the clue is correspondingly easy and unambiguous, solvers have every right to grumble. If you do have to have five-letter words with only two unches in your grid, you should try to avoid having unhelpful checking letters and/or make sure the clue is crystal clear. (Before anyone points it out, I admit that I have failed to do this on quite a few occasions!)

As for two unches in a 3-letter word, thatís a no-no. Look at the examples of this in the grid above (9 and 24 down). Apart from giving minimal help to the solver, it looks very amateurish, doesnít it?

It is also important to avoid having too many consecutive unches in an answer. A ďdouble unchĒ as in 26 across in the example grid isnít too bad, because half the letters of the word are checked. In 21 and 28 across itís really pushing it Ė four unches in a seven-letter word isnít great anyway, and when two of them occur consecutively the resulting letter pattern is very unhelpful. Double unches should not appear at the start of a word Ė denying the solver the opportunity to check the first two letters is unfair, and looks sloppy too Ė and preferably not at the end. Triple unches, such as in 6 and 18 down, are to be avoided at all costs.

In the case of barred crossword grids, such as those used by Azed, the requirements are rather stricter. The maximum number of unches allowed is:

Total Letters Max. Unches
3 0 (1 may be permissible)
4 1
5 1
6 2
7 2
8 3
9 3
10 or more A ratio of no more than 1 in 3

One of the useful features of the Sympathy program (no longer available) is that it tells you if the grid you have designed has too many unches (consecutive or otherwise), and also if there are too few. You do come across grids where there is so much checking that some of the short words fill themselves in, and while this is not particularly desirable, it is obviously better to be too helpful rather than too unhelpful (something the staff of certain budget airlines have yet to learn).

You may well have noticed that there is another fault with my example grid. The four corners are separated from each other, so that essentially the grid contains four discrete mini-grids. This usually happens by accident, maybe as a result of blanking out white squares in order to fit in certain preferred words. Itís always a good idea to check that there is reasonable overlap between the four corners of any grid you design. As you can see, the grid here has large chunks of black running through it, and apart from being aesthetically unpleasing and wasting space, too many black squares joined together is quite a reliable sign that there may be something wrong with the grid.

There are four basic grid patterns, as illustrated on the left. If you use Sympathy or Crossword Compiler to create your grids, all of these will be offered to you when you choose to design a grid from scratch. Pattern 1 is the one used for Times grids, and it has the advantage that you are unlikely to run into many problems with checking. It is also the most solver-friendly in that you have far more initial letters of answers checked, and getting the first letter towards an answer is very helpful.

Pattern 2 is more apt to lead to answers with too many unches, but can be useful if you want to include a Nina in your puzzle. Iíve also found from experience that Pattern 2 is more amenable to accommodating a large number of theme words. If there is a list of words that must appear in your grid, it can be awkward to fill in the rest of the grid without resorting to obscurities. It is easier to fit words together if there are fewer intersection points, as is the case with Pattern 2. Patterns 3 and 4 come somewhere in between in terms of advantages and disadvantages.

It has become standard practice that a crossword grid will have some degree of rotational or mirror symmetry. Thereís no reason why this should be apart from that it looks neater, but the convention has been established so firmly that if you submit a crossword with an unsymmetrical grid to any crossword editor, itís likely to be rejected right away. The only exception is in thematic puzzles like the Listener, where implementation of the theme may require an unsymmetrical grid. Be advised that even in this case there must be a very strong thematic justification for a lack of symmetry.

If all of this seems rather daunting, there is good news. You donít actually need to design a grid at all. Both Sympathy and Crossword Compiler provide a series of stock grids, and if you donít have either of these programs, you can use a blank grid from one of the newspapers. In the latter case you should populate the grid with your own words rather than use the original gridfill, in case there are issues of copyright. If you get on to the team of setters for a national newspaper, you will find that all of them (except the Independent) have their own sets of stock grids, so the matter of designing your own doesnít arise.

I always advise new setters to use ready-made grids if possible, so that they can concentrate on their clueing technique without having to worry if the grid is acceptable or not. If you want to ďseedĒ your grid with a few words for which you have already written clues, thereís absolutely no shame in using a stock grid with suitable answer lengths to accommodate these words. You may need to try your seed words in different positions in the grid, in order to avoid including obscurities or clue-unfriendly words among the remainder of the answers, and if necessary you can always modify a stock grid to suit your requirements. If you do make modifications, make sure that youíre not creating too many unches or, worse still, four unconnected mini-grids as discussed above.

I think I have covered all the things that can go wrong with grid construction, but I havenít included a detailed step-by-step guide to show the process of designing a grid from scratch. This is because I almost always use off-the-peg grids, which I then fill using my compiling software. For my FT puzzles I use the paperís stock grids, as required, and when I produce puzzles for the Independent or this site I use one of the many ready-made grids provided by the Sympathy program. I make changes to the stock grids if I canít otherwise fit in the words required for a theme, but it is very seldom that I construct the entire grid myself. Therefore I am probably not the best person to write such a guide, but fortunately there are a couple of superb articles which cover all aspects of designing a grid from scratch in detail. The first is on the excellent Crossword Unclued site, and the second is written by one of todayís leading setters, Anax.

As I said at the start, itís always a pity when a decently clued puzzle doesnít make the grade because of a substandard grid. I have written this piece in the hope that it will help to make the possibility of that happening less likely.